Official distributor of
Products
An industry pacesetter in the development of floor covering adhesives and floor preparation products – was founded in 1977 by Wallace F. Taylor, a well-respected chemist. In 1984 Taylor was sold to a British company who retained ownership until 1989 when the present management purchased the company.
Taylor 2071
- Immediate Wet Tack & Wet Grab One Part Cross
- Linking Technology Low VOC
- Solvent Free
- Low Odor Waterproof Adhesive Bond When Fully Cured Easy Troweling
- Non-Slumping Formula Can Use Over Porous and Non-Porous Subfloor Can Use Over Radiant Heated Subfloor Excellent Re-Bond Property Strong Elastomeric Flexible Bond Easy Cleanup
- Will Not Harm Wood Flooring
Taylor 2071
Use the Taylor Glide-On™ 1-Trowel to activate one coat application high strength, water resistant bond, and sound reduction properties of MS-Plus® Advance™.
Taylor 2091
As a Transitional Pressure Sensitive ™ Adhesive, Taylor’s Meta-Tec 2091 begins as a high peel strength pressure sensitive adhesive to help keep tile and plank lying at and avoid curling edges. The ooring can be laid into this adhesive within a 3 hour period. Then the product transitions over time into a high shear strength permanent bond that helps control any dimensional instability of the flooring.
Taylor 2055
Taylor Envirotec 2055 Performance+ Fast Tack Carpet Adhesive is a fast-tacking, solvent-free, ultra premium adhesive for the interior installation of both direct glue down and double glue down commercial carpets. This adhesive has been specially designed to provide quick grab with fast wet suction and holding power for bonding the most difficult to install carpet backings. Use to install the following carpet backings: woven polypropylene (Action Bac®), unitary (smooth and rough), polyurethane laminate, polyurethane foam (attached cushion), rubber foam, woven carpet, jute, and hot melt backings. Do not use on vinyl-back carpets. Product has excellent moisture resistance.
Taylor 2033
Taylor Envirotec 2033 Clear Thin Spread VCT Tile Adhesive is a clear set, solvent free, pressure sensitive adhesive made for the interior installation of asphalt and vinyl composition tile (VCT) and closed-cell foam-back hardwood parquet over approved substrates. This adhesive is formulated to be fast drying for quick installation. Tiles may be installed up to 24 hours after initial drying if the area remains dust and dirt free. Product has excellent moisture resistance. Taylor 2033 is a solvent-free, low-odor adhesive that meets all Federal, State and local government indoor air quality regulations. Do not use to install solid vinyl backed flooring.
Taylor 2027
Taylor Envirotec 2027 Pressure Sensitive Adhesive is a versatile, non-flammable, water-based, clear acrylic co-polymer adhesive that can be used "wet or dry" on horizontal surfaces. Specifically designed for the interior installation of vinyl backed carpet, vinyl backed broadloom carpet and modular tiles, it can also be used to install solid vinyl tiles and W.F. Taylor approved pad to substrate in a double stick installation. Do not use outdoors.
Taylor Acous-Tec
Faster, easier and superior sound reducing liquid underlayment. Reduces sound transmission up to IIC 71 & STC 67. Concrete moisture inhibitor. Patch and level uneven subfloor. Crack isolation membrane. Enhance thermal insulating properties of floor covering. One tool, one product, one hour.
Taylor 2071
- Immediate Wet Tack & Wet Grab One Part Cross
- Linking Technology Low VOC
- Solvent Free
- Low Odor Waterproof Adhesive Bond When Fully Cured Easy Troweling
- Non-Slumping Formula Can Use Over Porous and Non-Porous Subfloor Can Use Over Radiant Heated Subfloor Excellent Re-Bond Property Strong Elastomeric Flexible Bond Easy Cleanup
- Will Not Harm Wood Flooring
Taylor 2071
- Immediate Wet Tack & Wet Grab One Part Cross
- Linking Technology Low VOC
- Solvent Free
- Low Odor Waterproof Adhesive Bond When Fully Cured Easy Troweling
- Non-Slumping Formula Can Use Over Porous and Non-Porous Subfloor Can Use Over Radiant Heated Subfloor Excellent Re-Bond Property Strong Elastomeric Flexible Bond Easy Cleanup
- Will Not Harm Wood Flooring
"We launched the first environmentally friendly products in 1990 with our Envirotec® Series and continue to operate our company from the premise that our adhesives must exceed current environmental requirements regarding harmful chemical and VOC emissions. Consequently, more than half of our products are certified by Cradle to Cradle Products Innovation Institute, UL’s GREENGUARD Program, Carpet & Rug Institute (CRI) Green Label Plus Program, and Resilient Floor Covering Institute’s (RFCI) Floor Score program.
Our solvent free and extremely low VOC adhesives have been well accepted, even preferred, by installers since we were the first to introduce the technology to the industry over two decades ago. Taylor has been the pacesetter in green technology, in the flooring adhesive industry, being the first to pass the stringent testing from both CRI Green Label Plus®, UL 2818 – GREENGUARD® and Cradle to Cradle certification programs. The installation community can be assured of reliable (and even higher) performance, verified and certified environmental standards are consistently met."